--> Router does not forward multicast packets due to RPF Failure. In order to find this problem check Multicast Routing Table for the Particular Group
# show ip mroute 224.0.0.5
Check Incoming Interface and outgoing Interface correct or not...
# show ip mroute 224.0.0.5 count
Check whether Multicast Packets are being received or not on the router.
# show ip rpf < source>
to check if there is RPF error...
# debug ip mpacket 224.0.0.5
--> If incoming interface is different compared to RPF interface then use static multicast route to change...
---> Router does not forward the multicast packets because of the TTL Value of the source.To find out the problem is coming because of TTL
# show ip traffic ( check bad hop count here)..
# show ip mroute 224.0.0.5
Check Incoming Interface and outgoing Interface correct or not...
# show ip mroute 224.0.0.5 count
Check whether Multicast Packets are being received or not on the router.
# show ip rpf < source>
to check if there is RPF error...
# debug ip mpacket 224.0.0.5
--> If incoming interface is different compared to RPF interface then use static multicast route to change...
---> Router does not forward the multicast packets because of the TTL Value of the source.To find out the problem is coming because of TTL
# show ip traffic ( check bad hop count here)..
0 comments:
Post a Comment