We can configure DHCP Server on Aruba Wireless Controller either by using GUI or CLI method.
Method 1 : Graphical User Interface
--> Login to Aruba Wireless Controller by using GUI ( HTTP/ HTTPS Access via web browser)
--> Then Go to Configuration > IP > DHCP Server
--> Enable DHCP Server > Specify Parameters > Click on Apply
Method 2 Command Line Interface
--> Login to Aruba Wireless Controller by using CLI ( CLI Access via SSH/ Telnet)
--> Then enter following commands
(ARUBA) # configure terminal
(ARUBA) (config)# service dhcp --- To enable dhcp service
(ARUBA) (config)# ip dhcp pool dhcppool
(ARUBA) (config)# network 10.1.0.0 255.255.255.0
(ARUBA) (config)# default-router 10.1.0.1
(ARUBA) (config)# dns-server 10.1.0.1
(ARUBA) (config)# exit
Verify by dhcp information by using following command.
(ARUBA)# show ip dhcp database
Method 1 : Graphical User Interface
--> Login to Aruba Wireless Controller by using GUI ( HTTP/ HTTPS Access via web browser)
--> Then Go to Configuration > IP > DHCP Server
--> Enable DHCP Server > Specify Parameters > Click on Apply
Method 2 Command Line Interface
--> Login to Aruba Wireless Controller by using CLI ( CLI Access via SSH/ Telnet)
--> Then enter following commands
(ARUBA) # configure terminal
(ARUBA) (config)# service dhcp --- To enable dhcp service
(ARUBA) (config)# ip dhcp pool dhcppool
(ARUBA) (config)# network 10.1.0.0 255.255.255.0
(ARUBA) (config)# default-router 10.1.0.1
(ARUBA) (config)# dns-server 10.1.0.1
(ARUBA) (config)# exit
Verify by dhcp information by using following command.
(ARUBA)# show ip dhcp database
0 comments:
Post a Comment