--> Most of the times unified access points were not able to register with unified Controller.
--> This may occur because of different problems that cause the issue.
i) Unified Access Point should be on the same network as Unified Controller.
ii) Check the cable which is connecting Access Point to the Switch.
iii) Check Whether Unified Access Point is getting IP address or not from the DHCP server. In order to connect the Unified Access Point to Controller, it needs IP Address.
iv) Check Windows Firewall/ Defender is disabled on the PC where Controller is connected.
v) If the Access Points are still not able to register to Unified Controller then we have to manually specify the IP Address of the Unified Controller using a command on Access Point.
Md.Kareemoddin
CCIE # 54759
--> This may occur because of different problems that cause the issue.
i) Unified Access Point should be on the same network as Unified Controller.
ii) Check the cable which is connecting Access Point to the Switch.
iii) Check Whether Unified Access Point is getting IP address or not from the DHCP server. In order to connect the Unified Access Point to Controller, it needs IP Address.
iv) Check Windows Firewall/ Defender is disabled on the PC where Controller is connected.
v) If the Access Points are still not able to register to Unified Controller then we have to manually specify the IP Address of the Unified Controller using a command on Access Point.
Md.Kareemoddin
CCIE # 54759
0 comments:
Post a Comment