1) Connect Console Port of AP to serial port of the PC.
2) Connect Aux Port of AP to Ethernet Port of the PC.
3) Connect POE Port of AP to POE Switch.
4) Assign PC and AP IP address in the same subnet ( PC IP : 10.0.0.2/8, AP IP : 10.0.0.1/8).
5) Configure TFTP Server in the PC and download autonomous system image from the cisco.
6) Enter the following commands in Access Point
7) Once IOS is uploaded in the AP then it will restart with new image.
2) Connect Aux Port of AP to Ethernet Port of the PC.
3) Connect POE Port of AP to POE Switch.
4) Assign PC and AP IP address in the same subnet ( PC IP : 10.0.0.2/8, AP IP : 10.0.0.1/8).
5) Configure TFTP Server in the PC and download autonomous system image from the cisco.
6) Enter the following commands in Access Point
enable
debug capwap console cli
debug capwap client no-reload
capwap ap ip address 10.0.0.1 255.0.0.0
capwap ap ip default-gateway 10.0.0.2
archive download-sw /force /overwrite tftp://10.0.0.2/filename.tar
0 comments:
Post a Comment