1) Connect the console cable to the Switch and PC.
2) Now Remove the Power from the Switch.
3) Power on the Switch and Press Mode button untill you get switch: prompt. ( Basically you will get this when SYST LED turns into solid green).
4) Now we have to enter following commands.
i) flash_init
ii) load_helper
iii) dir flash:
iv) rename flash:config.text flash:config.old
v) dir flash:
vi) boot
5) Now Switch will boot and it will ask " continue with configuration dialog " say no.
6) Go to Privilege Mode and enter following commands
Switch# rename flash:config.old flash:config.text
Switch # copy flash:config.text system:running-conf
Switch # write
2) Now Remove the Power from the Switch.
3) Power on the Switch and Press Mode button untill you get switch: prompt. ( Basically you will get this when SYST LED turns into solid green).
4) Now we have to enter following commands.
i) flash_init
ii) load_helper
iii) dir flash:
iv) rename flash:config.text flash:config.old
v) dir flash:
vi) boot
5) Now Switch will boot and it will ask " continue with configuration dialog " say no.
6) Go to Privilege Mode and enter following commands
Switch# rename flash:config.old flash:config.text
Switch # copy flash:config.text system:running-conf
Switch # write
0 comments:
Post a Comment