--> MPLS LDP Autoconfiguration allows the router to enable LDP globally on all the interfaces where IGP Protocol is running.
--> MPLS LDP Autoconfiguration feature only works with OSPF & IS-IS protocols. It does not support other routing protocols.
--> In order MPLS LDP Autoconfiguration to work, LDP need to be enabled on the router globally.
Router(config)#mpls label protocol ldp
Router(config)# mpls ldp autoconfig
--> We need to disable LDP on the PE routers interface which is connected to CE Router. In order to disable LDP on particular interface we need to use the following command
Router (config)# interface ethernet0/0
Router(config-if)# no mpls ldp autoconfig
--> MPLS LDP Autoconfiguration feature only works with OSPF & IS-IS protocols. It does not support other routing protocols.
--> In order MPLS LDP Autoconfiguration to work, LDP need to be enabled on the router globally.
Router(config)#mpls label protocol ldp
Router(config)# mpls ldp autoconfig
--> We need to disable LDP on the PE routers interface which is connected to CE Router. In order to disable LDP on particular interface we need to use the following command
Router (config)# interface ethernet0/0
Router(config-if)# no mpls ldp autoconfig
0 comments:
Post a Comment