Like Cisco GNS3 supports Juniper also...
These are the following steps to install juniper on GNS 3
1) Download the Junos image.
2) Open GNS3> Edit> Preferences>qemu>junos
Identifier Name: Junos
Binary Image: specify the location where you have the image
RAM: 512MB
Number of NIC: 6
NIC model:e1000
Then click on save>Apply> ok
After that you can see juniper router available on router types or node types...
Now drag the juniper router and right click on juniper router and select start.
wait for 10 minutes your junos router will boot...
Then it asks for username /password
username: root
password:
no password and just enter...
Now you can do practice all juniper labs...
These are the following steps to install juniper on GNS 3
1) Download the Junos image.
2) Open GNS3> Edit> Preferences>qemu>junos
Identifier Name: Junos
Binary Image: specify the location where you have the image
RAM: 512MB
Number of NIC: 6
NIC model:e1000
Then click on save>Apply> ok
After that you can see juniper router available on router types or node types...
Now drag the juniper router and right click on juniper router and select start.
wait for 10 minutes your junos router will boot...
Then it asks for username /password
username: root
password:
no password and just enter...
Now you can do practice all juniper labs...
Sir, i got it torrent file from internet!
ReplyDelete